Friday, August 20, 2021

Eat Something Sweet

     I made another grab into the Paper Pumpkin lot from my garage sale find. This one is called "Boo-tiful Bags" from September 2014.      



      I recently found a spider border die at garage sale and wanted to use it. I decided to do three 4-inch strips for my background (lots of border opportunity). I also got out my "Ooze" border (gotta love this one).  

     From the kit I was able to incorporate: the sequins, black twine, stamps, the striped patterned paper, and the burlap bags. 
     I love double mats, so everything is double matted. 


     I made this tag using a dotted oval from the kit, the striped patterned paper, bat stickers, and a stamp.


     This journaling tag started as square on one end and rounded on the other. It had a tangerine border. Here is another find from the garage sale - same table as the Paper Punpkin boxes. There was a wood mounted Stampin' Up 2002 stamp of just squiggly lines. I used post-it notes around the border to stamp lines for journaling. I fussy cut the black patterned paper at the top and added an eye using a circle punch, and a VERY small tree stamp. I topped it off with a loopy bow (I think this looks a bit like spider legs). This was so much fun that I had to do it again.... minus the journaling bit. The 'eye-dea' comes from Rachel Tessman. You can see a video to make it here.


     Notice that the loopy bow is not so squiggly. I used a mini hair straightener. I bought it to straighten ribbon in the craft room, but now I see that it also works on twine. Hey, this is a great pic of that spider border. I just love fun border punches.

The namesake of the kit - Boo-tiful Bags

  BUT I DIDN'T WANNA MAKE TREAT BAGS!!!


   
     I cut the tops off of two of the bags and pulled the threads to make fringe. The last step was taking the sequins ribbon apart and making a trail of sequins to link the pages together.

Materials: 
   Patterned Paper: Stampin' Up - Paper Pumpkin September 2014
   Card Stock: Bazzill - Her Majesty
                                      Sour Apple
                       My Colors - Black Magic
   Stamps: Stampin' Up - Paper Pumpkin September 2014
                 The Stamps of Life - (Trick or Treat)
   Ink: Gina K - Tangerine
   Punches - Martha Stewart - Ooze
                                                Spider
                              

Thursday, August 19, 2021

Mother/Father Combo

      This is a layout using materials from the May 2013 Paper Pumpkin. This was most difficult. The papers were such light colors and there were almost no materials in the kit to work with. Oh, and the stamps - YUK!



     I ended up using the patterned paper from the kit and incorporating 2 stamp/die sets from my stash. The first is Vibrant Vases and the Vase Builder punch from Stampin' Up. This was a find from a garage sale in July. The other was a set released by The Stamps of Life in May called Stamps 4 Guys.


Stamps 4 Guys



Vibrant Vases


     I used some of the patterned paper to make a spot for journaling on each page of the layout. I embellished with black brads. I added shiny orange leaves to the Mother' Day side and star gems to the Father's Day side, both from my stash.



Materials:
   Paper Pumkin: Good Life Brag Book - May 2013
   Card Stock: Bazzill - Burning Embers
                                      My Colors: Black Magic
                                      Dear Lizzy: Christmas Winter Wishes
   Ink: Gina K - Stormy Sea
                         Coral Reef
                         Prickly Pear
                         Tranquil Teal
   Stamps: Stampin' Up - Vibrant Vases
   Dies: Burniston - Happy Mother's Day
                               Happy Father's Day
                               Long Natures Edges
            The Stamps of Life -- Stamps 4 Guys
   Punches: Stampin' Up - Vase Builder
   Embellies: Black Brads 
                     Gold Star Gems



Wednesday, August 18, 2021

Pepper, the Poodle

      This Saturday is my granddaughter's birthday. She just loves dogs and they have a new puppy. It is a miniature poodle named Pepper. Karen Burniston and I had a conversation back in July about how to make a black poodle. I hope she will not be too disappointed in the result.

Pepper, the Poodle

   I started off by purchasing a digital paper for the poodle panels. This is from Etsy. I use Etsy digital paper frequently.  I thought this squiggly print was just like Pepper. This paper is printed on white card stock in a printer, so it has a white core. I inked all of the pieces, so the white core would not stand out.



   I am not going to describe the entire process here. You can check out Karen Burniston's how-to video here.
   In order to make this dog a poodle I used black yarn to wrap the top of the ears and to make 2 pom poms. The diameter of the pom poms are 1.5 inch and 2 inches. The larger pom pom is for the top of the head. I just pierced 2 holes in the top of the head, pulled the yarn through and tied a knot. Easy-peasy!



     Making the tail was a bit more challenging. I had a vision of how I was going to accomplish this, but the end result was totally different. I wanted a spring for the tail so it would bounce. I was thinking the spring that come in pens would be good. I told my husband I was looking for a spring. He says, "You can look in my 'SPRING BOX' to see if there is something that will work." ---a SPRING BOX! Is that a thing????

YEP - IT IS A THING!!!


   I constructed the tail before closing the bottom bitty ball. The materials I used were a 1.5 inch pom pom with two long tails, 1/8 inch hole punch, 6 hole reinforcers stacked to make sturdier, dental floss threader, and a spring.


   I punched a hole in the bottom bitty ball about 1/4 inch from edge, centered top to bottom. Make sure hole is going to be on the back of your poodle and not in one of the panels with the folded wings. I then used scissors to cut a slit from the hole to the edge of the panel.



   I slid the spring into the hole from the slit.


   Making sure that the hole is visible in the spring, use the dental floss threader to pull the two yarn tails of the pom pom through the spring.



   Push the spring as far into the hole as possible (away from the edge of the panel). Cut a slit in the hole reinforcer. Add glue to the reinforcer (The adhesive on the hole reinforcer will not last.) and slide the reinforcer through the spring. The reinforcer will stick out of the edge of the panel. Trim it flush with the edge.



   Wrap one of the pom pom tails around the spring, getting it caught in the rings of the spring. Finally tie the 2 pom pom tails in a knot. Trim the tails.



   I assembled the ball as per Karen's instruction video. It may have been easier to connect this panel first, but I didn't do it that way. Ultimately I hesitate to recommend this. I have a feeling that it would be easier to do that panel first.

   I am sure there are a dozen different/better ways to add a poodle tail. I am happy with it! It doesn't hang down and it bounces - these were my goals.




   I did not put the poodle in a card. I attached it to the top of the gift box. My grandkids don't really like getting the bitty balls in cards. They would prefer to PLAY with them. The first time this happened I had to destroy the card to get the bitty ball unicorn off of the card. What a waste of time!!! 

I attached Animal Crossing digital paper to the top of the gift box. Animal Crossing is so new that gift wrap is not readily available yet. When I want copyrighted prints, such as Cat in the Hat, Mario, Pokemon, Yogi Bear, Doc McStuffins, John Deere, and now Animal Crossing, I raid the Etsy digital paper stores. If you search "digital" on my search box at the top of this page, you will see examples of this.



Materials:
   Patterned Paper: Black & White Digital Paper Pack by pointandpoem (Etsy Store)
                              Animal Crossing Themed Digital Paper by Findings Photo Designs (Etsy Store)
   Card Stock: My Colors - Black Magic
                                           Snowbound
                                           Firecracker
                      Specialty - Holographic
                                        Shiny Black
   Dies: Burniston - Bitty Ball Pop-Up
            The Stamps of Life - Foxes 2 Stamp Dies (alphabet)
   Ink: Distress - Black Soot 
   Embellies: Black Yarn
                     White Gel Pen
                     Spring (1/4 inch diameter; 1.5 inch long)

Monday, August 16, 2021

It's Your Day

     Here is my second layout for the June 2015 Paper Pumpkin. To see the first and read about my "Find from the Past" go here.

     For this one basically made a greeting card front on each page and added mats. I used the jute twine, pre-made flowers, wood veneer and sticker banners and stars provided in the kit.




 
   The flower centers are from a Stamps of Life stamp called Flowers 2 Fill. 

   For the layout border I used a ticket stub punch in the corners and a white gel pen to make a dot-dash pattern.



Materials: 
   Stampin' Up - Paper Pumpkin September 2014   
                              Patterned Paper 
                              Stamps 
                             Wood Veneer banners 
                              Flower cut-outs 
                              Stickers
   Card Stock: Bazzill - Burning Embers
                       My Colors - Snowbound
                                           Desert Cactus
                                            Kraft
   Stamps: The Stamps of Life - Flowers 2 Fill
   Ink: Gina K - Tangerine
                          Kraft
                          Grass Green
   White Gel Pen 


Sunday, August 15, 2021

Happy Thoughts

     I hit a jackpot at an estate sale a couple of weeks ago. I got 15 Paper Pumpkins, most never opened. They are all dated between 2013 and 2015. I have never been particularly interested in Paper Pumpkin. I prefer to design my own cards and layouts.  Kits are super fun when you leave the safety of the directions sheet.


      I closed my eyes and picked the kit "Happy Thoughts" from the pile. The kit gives directions for cards, but I wanted to make a layout so... I did some Pinterest research and found an entry from Remarkably Created.  I started to CASE it, but ended up going rouge. Her layout looks like this... 

     I turned it into a 2-page layout. I moved the banner and used my Copics to color the wood veneer banners. I changed the jute twine to gray twine to match the mat I chose. There were 3 clear buttons included. They are the centers of 3 chosen flowers. I loved stamping the flowers on the background and brought in another stamp set from The Stamps of Life called Flowers 2 Fill. I stamped gingham print in the centers and used the leaves from this set as well. 

Buttons in flower centers

Copic-colored veneer banner

      My original plan was to get as much of the kit onto these 2 pages, but the kits have way too much stuff in them for that. I ended up making another 2-page layout, which you can see here tomorrow.

Materials: 
   Stampin' Up - Paper Pumpkin September 2014   
                              Patterned Paper 
                              Stamps 
                              Wood Veneer banners
                              Clear Buttons
   Card Stock: Bazzill - Sugar Wafer
                       My Colors - Snowbound
   Stamps: The Stamps of Life - Flowers 2 Fill
   Ink: Gina K - Tangerine
                          Stormy Sky
                          Grass Green
   Copics: